4mm Thick Temper Glass IP65 Industrial LED Flood Lights
4mm thick temper glass IP65/IK08 rated 140lm/w 120W Industrial LED
Flood Light
light distribution
The light distribution of the FT-series is generated by a
structured reflector. With a reflectivity of nearly 97% it is
possible to use almost the whole luminous flux and the whole lamp
efficiency gets better. By using an optional available diffuse
cover it is possible to illuminate outdoor areas which demand high
requirements in glare limitation. The photometrical files of these
luminaires can be email by our salespersons.
light source
To get a relieable and efficient light source we have chosen a
diode from the well known company CREE , LUMILEDs , Bridgelux or
OSRAM.
The for years used diode has even at high temperatures a small loss
of luminous flux und extremly good photometric characteristics, for
example a high color rendering index.
Key Features
1. The light source adopts high lumen output and high quality LEDs
chip LUMILEDs SMD3030 or OSRAM SMD3030 .
2. The heat fin in extruded aluminum AL6063-T5 (heat conductivity 201W/m*K and 2.1 twice mor than popular die cast
aluminum alloy ADC12 conductivity 96W/m*K),ensures the efficiency of heat emission, guaranteeing the light a
long life span.
3. The high quality pure polish aluminum as the reflector has high
reflecting efficiency, and it can make sure the luminous flux,
controlling the light inside of a useful area. It improves the
efficiency of light uniformity and utilization, showing the LED
advantage of energy saving.
4. The integration of 4mm high strength roughened temper glass and
the housing makes the light work perfectly in the high humidity
environments.
5. New high efficiency constant current driver Meanwell or Philips
brand. Wide range of input voltage: AC100-277V or 200-240VAC.
6. No delay start. No waiting. It can reach its normal light as
soon as it is turned on. No noise.
7. No electrical wave, compliance to CE RoHs SAA TUV.
8. Environment friendly and no lighting pollution. We exert the
design of using cold light source. It’s no heat radiation. The
floodlights do not have lead, hydrargyrum and any other
contamination. It is really environment friendly with ROHS
certificate
Technical data
| Model | Power(W) | Current(A@230VAC) | IP-protection | Dimensions(mm) | Weight(KG) |
| LCD-FT-013 | 10 | 0.045 | IP65 / IK08 | 185x135x68 | 0.75 |
| LCD-FT-023 | 20 | 0.091 | IP65 / IK08 | 185x135x68 | 0.85 |
| LCD-FT-033 | 30 | 0.137 | IP65 / IK08 | 220x180x88 | 1.30 |
| LCD-FT-053 | 50 | 0.228 | IP65 / IK08 | 220x180x88 | 1.50 |
| LCD-FT-073 | 70 | 0.320 | IP65 / IK08 | 260x195x105 | 1.80 |
| LCD-FT-103 | 100 | 0.460 | IP65 / IK08 | 305x250x125 | 4.80 |
| LCD-FT-123 | 120 | 0.550 | IP65 / IK08 | 305x250x125 | 5.00 |
| LCD-FT-153 | 150 | 0.690 | IP65 / IK08 | 305x250x125 | 5.30 |
| LCD-FT-203 | 200 | 0.910 | IP65 / IK08 | 400x360x140 | 8.10 |
| illumination distribution |  |
| Product dimension |  |
installation
1. Carefully take the product out of the packaging removing any
transport safeguards.
2. The product is solely suited for installation on the wall,
ceiling and floor.
3. This product must be installed by a preofessional electrician.
4. Please make sure that the thermal management can work without
problem. Take a look at picture below.
5. Fasten the fixture to the installation place using properly
dimensioned fastening materials.
6. Connect the floodlight with a power source.
7. Check if the product functions properly and if it is securely
fixed
8. The product is now ready for operation.
| Wall mounted | Surface mounted | Ceiling mounted |
 |  |  |
III. warning
The installation should only be done by a professional electrician!
Warranty for this product is 5 years.
The warranty expires by abnormal usage, connection or change of the
structure. Damage by high voltage is not covered by the warranty:
>4kV(L,N to PE) / 2kV(L to N)
For more technical information, please contact our customer
support!
Product exploded view
